20KA 120V-277V LED Surge Protectors for Outdoor LED Luminaires, Type 5 Single Phase Surge Protective Device – Category C Outdoor Enclosure

McWong’s SPD series of surge protectors is designed for use with LED drivers, fluorescent ballasts, HID ballasts, and induction lighting
ballasts. These products provide an additional level of protection from dangerous power line transients in commercial and industrial
applications. These devices protect Line-Neutral, Line-Ground, and Neutral-Ground in accordance with IEEE/ANSI 62.41.2. McWong’s SPD series
also provide option for LED status indicator and threaded nipples.

This product line is suitable for indoor and outdoor. Typically this product is used in 24/7 outdoor applications such as street lighting, parking lots,
pathway lighting, and LED signage.

LED Surge Protector Spec:

• SPD-277P-20KA-EC1
• 10-20KA/KV ratings
• Surge location rated Category C
• Operating ambient temperature: -35°C~+85°C
• Storage Temperature and Humidity Range: -35°C~+85°C
• 120-277VAC mains 16AWG/200mm Parallel without thermal fuse
• Maximum Continuous Operating Voltage & Max Discharge Current: 320 VAC, 20 kA(8/20μs)
• Agency Approval: UL1449, Type 5
• Up to IP65 rated enclosure for wet locations
• UL1449 recognized component E466236

Surge Protective Device Feature:

• Works with LED drivers, fluorescent ballasts, HID ballasts, and induction lighting ballasts.
• These devices protect Line-Neutral, Line-Ground, and Neutral-Ground in accordance with IEEE/ANSI 62.41.2
• Thermally protected for field installation
• For use with 120-277V LED drivers
• 10KA/KV and 20KA/KV ratings
• Up to IP65 rated enclosure for wet locations
• High temperature / flameproof enclosure
  (85°C max surface rating)

Applications

• Outdoor and LED Lighting
• Roadway lighting
• Traffic lighting
• Digital signage
• Wash wall lighting
• Parking garage/lot lighting
• Flood lighting
• Tunnel lighting
• Street light
  

Special Link:

Buy 3pin Copper Wire

Any question please contact us below: